Part 1: Save a Location
Step 1: Connect your WeWALK Smart Cane 2.
Open the WeWALK App and connect your WeWALK Smart Cane 2 to your mobile phone automatically. You’ll hear confirmation that it’s linked up. No manual pairing is needed.
Step 2: Press the round button.
Your Smart Cane 2 has four buttons. The one you want is the second from the bottom, and it’s round.
Step 3: Press and hold, then speak.
Hold the round button and say “Save my location as [name].” For example: “Save my location as office.”
The cane confirms with a short “Save location” message. Done. That spot is now stored in your personal list.
Pro tip: Save locations while you’re physically standing there. It’s the fastest, most accurate way to pin a spot, whether it’s your front door, a bus stop, or your favorite park bench.
Part 2: Navigate to a Saved Location
Step 1: Give the round button a short press.
Don’t hold it this time, just tap it. You’ll hear “My places.”
Step 2: Browse your list.
Use the up and down buttons to scroll through everything you’ve saved. The cane reads each name aloud as you go, for example “Central Park” or “Office.”
Step 3: Select your destination.
When you hear the place you want, press the round button again to select it.
Step 4: Choose “Go there.”
Confirm, and step-by-step navigation begins right away. Just start walking.
Quick Recap
Goal | What to do |
Save a place | Press and hold the round button → say “Save my location as…” |
Open your saved places | Short press on the round button |
Browse the list | Use the up and down buttons |
Start navigating | Press the round button on your choice → “Go there” and start step-by-step navigation |
Next time you arrive somewhere new that you’ll likely visit again, take five seconds to save it. Over time, you’ll build a personal map of your world, one that’s always just a button press away.
Happy walking! 🦯
